Product Specification
Rosso Verona is a light orange red to dark red with nodules and partly stylolitic veins sedimentary rock quarried in Italy. It can be processed into Honed, Aged, Polished, Sawn Cut, Sanded, Rockfaced, Sandblasted, Bushhammered, Tumbled and so on
Material | Rosso Verona | |
Color | Red | |
Surface Finish | Polished, honed, antique,sandblasted,bush hammered, etc. | |
Available size | Tile | 305 x 305mm, 305 x 610mm,400 x 400mm,610 x 610mm, 600mmx60mm，600mmx400mm etc. Thickness 10mm 20mm 30mm |
12" x 12", 12"x 24", 16" x 16",18" x18", 24" x24" etc. Thickness 3/8" | ||
Packing | Tile | carton inside + strong wooden crates with reinforced straps outside and fumigation |
Delivery time | About 7-10 days after receiving 30% advance payment | |
Payment terms | T/T: 30% ADVANCE PAYMENT, 70% BALANCE AGAINST B/L COPY RECEIVING | |
L/C: irrevocable L/C at sight | ||
Product Photo
Marble Colors
Professional Inspection
After the products are finished, the QC will inspect the length, thickness, glossiness, flatness, edge finish and everything piece by piece according to the order list.
Packing & Container Loading
We use strong wooden crates with reinforced straps or wooden bundles outside with fumigation.
FAQ
What are the technical requirements for marble?
Due to the difference in application of natural marble, its industrial technical requirements have different focuses. The main requirements of natural marble blocks The blocks must have the shape of a right-angled parallelepiped. The size of the block requires a length greater than or equal to 100 cm, a width greater than or equal to 50 cm, and a height greater than or equal to 70 cm. Appearance quality requirements should be basically the same for the color tone pattern of the same batch of blocks; the appearance quality grades such as corners, ribs and cracks of the blocks should meet the requirements of Table 4.25.6. Physical performance requirements: bulk density is not less than 2.6g/cm3; water absorption is not more than 0.75%; dry compressive strength is not less than 20MPa; bending strength is not less than 7.0MPa.
