New G603 Granite is a kind of grey granite quarried in China. This stone is especially good for Exterior - Interior wall and floor applications, monuments, sills, stairs, countertops, mosaic, fountains and other design projects.G603 Granite can be processed into Polished, Sawn Cut, Sanded, Rockfaced, Sandblasted, Tumbled and so on.
Polished, flamed, honed, sandblasted, bush hammered, antique, leather etc.
Tiles: 300mm x 300mm or (12" x 12"), 400mm x 400mm or (16" x 16"), 457mm x 457mm or (18" x 18"), 300mm x 600mm or (12" x 24") 600mm x 600mm or (24" x 24")
Slabs: (1800mm - 3200mm) x (600mm - 2200mm)
Countertops: 96" × 26", 108" × 26", 96" x 16", 72" x 36" 76" x 36"
Vanity Tops: 25" x 22", 31" x 22", 37" x 22", 49" x 22", 61" x 22"
Thickness: 10mm, 12mm, 16mm, 18mm, 20mm, 23mm, 25mm, 30mm etc.
Carton inside + strong wooden crates with reinforced straps outside and fumigation
Strong wooden crates with reinforced straps outside and fumigation
About 10-15 days after receiving 30% advance payment
T/t: 30% advance payment, 70% balance against b/l copy receiving
L/C: irrevocable L/C at sight
Free samples are available
After the products are finished, the QC will inspect the length, thickness, glossiness, flatness, edge finish and everything piece by piece according to the order list. To make sure that the goods meet the needs of customers.
Packing & Container Loading
We use strong wooden crates with reinforced straps . Sometimes, it will also use cartons inside for some products. After the products are packed well, professional workers will load them and fixed them carefully into the container.
What is flamed surface?
A: The flamed surface refers to the rough surface finish processed by high temperature flame produced by acetylene, oxygen or propane, oxygen, or liquefied petroleum gas, oxygen as fuel. There are a few stones that can not be flamed or processed with poor results. Because the effect of flamed can burn off some impurities and low melting point components on the stone surface, thus forming a rough finish on the surface, the hand will feel a certain tingling. There are certain requirements for the thickness of stones in the process of firing to prevent the cracking of stones in the process of processing. Generally, the thickness of stones should be at least 2CM, and some of them have higher requirements.